Home

Paint

Protection against rusting

Pieza pintada en verde
Protection is achieved by projecting epoxy polyester paint onto castings which have been recently shot blasted.

The paint is applied to each detail separately to achieve 100% paint coverage on the castings.

Characteristics Specification Test method
Type
Colour
Thickness steel substrate
Thickness of the coating
Levelling - Finishing
Gloss angle of 60º in %
Cross-hatch adhesion
Erichsen pressing in mm
Cylindrical folding with mandrill
Persoz pressing in seconds
Impact dir.1Kg. 12,5 mm
Impact ind. 1Kg. 12,5 mm
Dif. Colour 7 = MB5=B3=R1=M
Salt Spray Test (ISO 1456)
Saturated Humidity (DIN 50017)
Weathering Q.U.V. (UNE 48251)
Epoxy polyester
Black R.A.L. 9004
1,0
60,0 to 80
7,0 to 9,0
35,0 to 50,0
100,0
5,0 to 10,0
6,0
200 to 350,0
40 to 100
40 to 100
7,0
250 hrs. minimum
250 hrs. minimum
AE 2,5 ÷ 3 (200 h)


In millimetres
In microns ISO 02360
LV-106
ISO 2813
ISO 2409
ISO 1520
ISO 1519
ISO 1522
ECCA T5
ECCA T5
VISUAL acc. to worker
ISO 1456
DIN 50017
UNE 48251

Fundiciones de Odena, S.A · Ctra. NII Km. 555,2  · 08711 Òdena (Barcelona) · +34 93 804 7373